Where can I buy ~250 steel rulers with our logo below $2 each?
(Searching for advertising specialties might help.) |
Request for Question Clarification by
tutuzdad-ga
on
15 Feb 2003 06:26 PST
My guess is that the prices will vary depending on the quality/makeup
of the steel/alloy used, the complexity of the ruler itself (in terms
of what it can do - i.e. measure in units, metric, etc), where you are
located (i.e. shipping), how complex your logo is, whether you have
the logo camera ready or need the company to do that for you, whether
you have this done domestically or abroad, and so on.
Regards;
tutuzdad-ga
|
Request for Question Clarification by
tutuzdad-ga
on
15 Feb 2003 06:29 PST
I'm sorry - I mean to add:
If you'd like me to point out a number of sources that do this "type"
of thing so you can visit each one yourself and see if what they offer
is to your likeing, I'd be happy to assist you.
Regards;
tutuzdad-ga
|
Request for Question Clarification by
pafalafa-ga
on
15 Feb 2003 06:31 PST
I only got one hit at a really good price, but the info is slightly
ambiguous, so here it is, FYI:
http://www.logomark.com/ShowModelNumbers.asp?ProductID=1273&CatalogID=0&TypeID=0&FinishID=0&ColorID=0&PricePoint=0&CurrentPage=1&FreeText=ruler&SearchCloseout=0
TPR1506: Ruler 6" Metal Ruler Silver [Laser Engraved]
$0.60/ea for blank rulers, but the company also prints logos (they're
called, LogoMark, after all), but the costs were not specified. You
might want to contact them for more infol
|
Request for Question Clarification by
tlspiegel-ga
on
15 Feb 2003 10:19 PST
Hi again!
Am I correct in assuming you wish to go forward with a 6 inch ruler?
Please indicate if you require only inches or inches and
centimeters... and also if you wish the ruler to be all stainless
finish on both sides, or to have a cork layer over the underside
(which is what I have). Also need to know the width of the ruler you
desire.
I'm fairly certain an actual connection via email or phone will have
to be made to the various companies - and most are only operational
during the week from Monday-Friday.
Thanks and I hope I can help you more on your ruler-quest!
tlspiegel
Google Answers Researcher
|
Clarification of Question by
swisscheese-ga
on
15 Feb 2003 11:05 PST
pafalafa - That's perfect except they seem to deal only with members
of ASI.
tlspiegel - 6 or 12". Inch + cm would be nice. Cork or no cork. Any
width. I can wait till a weekday.
|
Request for Question Clarification by
tlspiegel-ga
on
15 Feb 2003 11:30 PST
Hi swisscheese,
I've been to your website and didn't see any logo. Would you be so
kind as to specify some details for me about the logo you desire.
When I made my calls on Thursday I was asked to send a fax re: the
complexity of the logo, etc. If I had some information to go on -
that would certainly help me in my further research for you. Thanks
in advance,
tlspiegel
Google Answers Researcher
|
Clarification of Question by
swisscheese-ga
on
15 Feb 2003 13:52 PST
Hi tlspiegel - the logo is the name eMachineShop in bold letters. - swisscheese
|
Request for Question Clarification by
tlspiegel-ga
on
16 Feb 2003 12:40 PST
Hi swisscheese,
I don't feel at this time I will be able to research the answer for
you, and invite others to try. I don't have enough information to
satisy your question.
Good Luck!
tlspiegel
Google Answers Researcher
|
Clarification of Question by
swisscheese-ga
on
16 Feb 2003 14:25 PST
Hi All - Don't get hung up on the logo. As long as there is some
provision for some kind of logo we'll adapt. - swisscheese
|
Request for Question Clarification by
tlspiegel-ga
on
18 Feb 2003 10:57 PST
Hi Swisscheese,
I see no one has answered the question yet, so I decided to go ahead
and try and find your ruler for you... I presently have made 2 phone
calls, sent a picture of your logo (rough estimate of what it will be)
to one company and waiting for replies from both via: email and phone.
Once I get more information (both companies are in the midst of the
horrific snowstorm out east) but they told me they'd reply within the
hour) I'll post more which shouldn't be too much longer.
Thanks,
tlspiegel
Google Answers Researcher
|
