Dear littlefeather-ga;
Thank you for allowing me an opportunity to answer your interesting
question. I didn?t find a list that was intended exclusively for
California based companies but I found several of them that listed
businesses in general (many of which are located in California):
RAPID PROTOTYPING & STEREOLITHOGRAPHY: COMPONENT DATABASE
http://www.medibix.com/CompanySearch.jsp?cs_choice=c&clt_choice=t&treepath=Services%09PRODUCTS+AND+SERVICES%09Contract+Manufacturing%09Rapid+Prototyping,+Stereolithography
THOMAS REGISTER
http://www.thomasregisterdirectory.com/prototypes/
MOTIONNET.COM ENGINEERING DIRECTORY
http://www.motionnet.com/cgi-bin/search.exe?a=cat&no=3618
TECHNOLOGY SEEK
http://www.technologyseek.net/categories/Science__Technology__Manufacturing__Prototyping__Rapid_Prototyping__Service_Providers.php
I hope you find that my research exceeds your expectations. If you
have any questions about my research please post a clarification
request prior to rating the answer. Otherwise I welcome your rating
and your final comments and I look forward to working with you again
in the near future. Thank you for bringing your question to us.
Best regards;
Tutuzdad-ga ? Google Answers Researcher
INFORMATION SOURCES
Defined above
SEARCH STRATEGY
SEARCH ENGINE USED:
Google ://www.google.com
SEARCH TERMS USED:
You can repeat this search strategy and find more lists like the ones
I mentioned above. I found these by searching for:
stereolithography services ca
and
prototyping services ca |
Request for Answer Clarification by
littlefeather-ga
on
10 Feb 2004 10:48 PST
Hi, Tutuzdad,
Thank you for the results. Some further clarification required:
(1). Does the result from your first website leads to only 69
companies or the rest of them from A to Z categories?
(2). From the last website (Technology Seek) you provided, I cannot
get the connection.
(3). Is there a way to narrow down the search to 3D Systems, Valencia
CA and the companies that uses its equipment?
Please clarify. I appreciate your prompt response.
Littlefeather
|
Clarification of Answer by
tutuzdad-ga
on
10 Feb 2004 12:18 PST
Dear Littlefeather-ga:
(1). Does the result from your first website leads to only 69
companies or the rest of them from A to Z categories?
The first link lists 69 stereolithogragy companies only. The "A-Z"
links list companies of all types by name in alphabetical order.
(2). From the last website (Technology Seek) you provided, I cannot
get the connection.
It won't open for me wither now. It may be down for maintenance or due
to some glitch. Try it again later and I'm sure it will work fine. It
is a fairly impressive list.
(3). Is there a way to narrow down the search to 3D Systems, Valencia
CA and the companies that uses its equipment?
I don't know of any way to single out which companies use 3D Systems
specifically without getting that information directly from the
company itself. So, of course, we must turn to the company to find
out:
AcroMed
AEG Hausgeräte
AlliedSignal Aerospace
AlliedSignal Automotive
Black & Decker
Bose
DaimlerChrysler
Danish Technological Institute (DTI)
Delphi
DePuy
Durden
Eastman Kodak
Electrolux
EMTEC & BASTECH
Ford Motor Co - Chassis Division
Ford Motor Co
Frantz Tool
GM
Hamilton Standard
Hasbro
Igloo Products
Johnson Controls
Logitech
Martin-Baker Aircraft
Martin Marietta
Mattel
Mercedes Benz
Molex
Motorola
Naval Air Warfare Center
Northrop Grumman
Pitney Bowes
Porsche
Precision Castparts
Pure Fluid Magic
Queensland Manufacturing Institute (QMI)
Quentor
The Rover Group
Ryobi
Schilling Engineering
SLA Biotec
Styles
Texas Instruments DSEG
Tupperware
Xerox
Zurich University
Zumtobel
http://www.3dsystems.com/company/company_ourcustomers.asp
A search of stereolithography in the Valencia area itself proved
futile though as 3D Systems seems to be the primary service provider
for that area. The larger search for California statewide is where
these lists I presented you came from.
Using the Google search - stereolithographic velencia - did produce
some results however and some of the links do mention a few that are
using 3D's technology:
://www.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q=stereolithography+services+valencia
http://directory.google.com/Top/Science/Technology/Manufacturing/Prototyping/Bureau/
Regards;
tutuzdad-ga
|
Request for Answer Clarification by
littlefeather-ga
on
11 Feb 2004 10:06 PST
Dear Tutuzdad,
I finally got the chance to access the last website that you searched.
Could you let me know if the answer will be posted on this Google
website permanently? I just wonder if I should do something about the
results you gave me.
Regards,
Littlefeather
|
Clarification of Answer by
tutuzdad-ga
on
11 Feb 2004 10:50 PST
Can you clarify what you are asking here?
"Could you let me know if the answer will be posted on this Google
website permanently?"
My answer will be permanently posted to this forum unless you don't
feel it answered your question. If you are disappointed by the
research for good reason let me know and I can take action to have the
answer removed.
If you think this research sufficiently answers your question as it
was asked you can rate it by clicking on the RATE button. This will
effectively close the session and our business here will be through.
Also please clarify:
"I just wonder if I should do something about the results you gave me."
What exactly do you mean by "DO SOMETHING"? is there something else
that I can do for you perhaps?
Regards;
tutuzdad-ga
|
Clarification of Answer by
tutuzdad-ga
on
11 Feb 2004 10:52 PST
I should also mention that if, for some reason, you would like to have
the entire question removed from this forum BUT you ARE satisfied with
the research you recieved, I can have that done for you too. In some
instances customers prefer to have traces that they requested
information deleted for a variety of reasons and the Editors usually
comply with that request, keeping in mind that the fee will still be
paid for the work done.
Regards;
tutuzdad-ga
|
