Hello Morpheusfla,
I had found the following for your question,
For the 2000x, here the procedure is:
1. Press down on the arrow in the center of the battery door and slide
the battery door away from the center of the pager.
2. Lift the battery door away from the pager.
3. Using a pen or other small pointed object, press the reset button.
(a small circular 'hole' (I think of black or grey colour-these are
always like this), which you can only press with a pen or some pointy
thing, near the battery)
4. Fold the protruding lift tab down on top of the battery, then slide
the battery door back into place.
This procedure is in the users' manual of the pager, page 19-20 (if
you are reading with Acrobat reader, it shows page 27-28)
And here is the manual: (you may have it already....)
http://216.87.173.24/manuals/2000X_User_Manual_E.pdf
For the 935, I couldn't find a similar guide, but from one drawing in
the manual (http://216.87.173.24/manuals/P935_User_Manual_E.pdf) I see
that there may be a similar 'button' next to the battery as in the
2000x
hope this helps,
regards,
crowley |