![]() |
|
![]() | ||
|
Subject:
Geforce 4 MX 440 64 mb PCI has lines when running Tony Hawk
Category: Computers > Graphics Asked by: wwjd123-ga List Price: $10.00 |
Posted:
11 Jun 2004 20:13 PDT
Expires: 11 Jul 2004 20:13 PDT Question ID: 359944 |
Graphics card works fine in Windows but has some problems with some games but really messes up in this game. Screen has lines and cones shooting everywhere and you can't see where you are going. Using driver 5.6.7.2, Direct X 9.0b. Intel 82810E Controller shows up as a display adapter but isn't being used. | |
| |
| |
| |
| |
|
![]() | ||
|
There is no answer at this time. |
![]() | ||
|
Subject:
Re: Geforce 4 MX 440 64 mb PCI has lines when running Tony Hawk
From: justanaveragenewbie-ga on 12 Jun 2004 22:03 PDT |
The problem is most likely that you didn't disable your onboard video when you install your PCI graphics card. You'll need to do this in the BIOS. However, because there are so many different versions and types, it is hard to tell you exactly how. The reason your seeing the cones, distorted shapes, however is most likely because of the Intel "extreme" graphics not being capable of hardware T&L, which is required in most new games. If possible, try setting the Geforce4 MX to your "primary display adapter" using the display icon in your control panel. |
Subject:
Re: Geforce 4 MX 440 64 mb PCI has lines when running Tony Hawk
From: robmods-ga on 24 Jun 2004 10:47 PDT |
If nothing else works you could try using the Intel graphics as the primary display driver and see if that works. If you're only running Tony Hawk 1 ( Or another early version ) it should work fine. |
If you feel that you have found inappropriate content, please let us know by emailing us at answers-support@google.com with the question ID listed above. Thank you. |
Search Google Answers for |
Google Home - Answers FAQ - Terms of Service - Privacy Policy |