We are seeking a modern CNC shop that will produce parts from our DXF files.
Part drawing can be seen at:
http://www.ofoto.com/BrowsePhotos.jsp?&collid=99324679306
The parts are made of half-hard 360 brass, with a surface finish
between 65-35 RMS. The surface finish is very important, and may be a
second op for the part. We require approx 6,000 parts per year of 8
different part numbers. These parts need 3 different plating finishes
(chrome, satin nickel and black chrome).
We prefer to find a shop in China or Mexico or another country, with
good customer service (ie, emails/telephone answered in a timely
fashion, engineers familiar with NURBS, G-code, etc). We have already
seached Kompass, Lexis/Nexis, ABI/INFORM Trade & Industry, ABI/INFORM
Global, Business Source Elite, and more.
Any replies greatly appreciated and compensated. Prefer Company name,
Contact person, telephone number and email, or any combination of the
above.
Regards,
CultureJam |
Request for Question Clarification by
redhoss-ga
on
21 Sep 2004 04:57 PDT
Have you investigated or would you be interested in companies with
offices in the USA that have their machine shops located in Asia,
Mexico or Russia.
|
Clarification of Question by
culturejam-ga
on
21 Sep 2004 13:11 PDT
Yes, we have tried various "expiditors" here in the US, but the prices
are high, and when there is a QC or other issue, it creates a delay in
the communication chain. I may comsider some that have low markup and
excellent (fast, accurate and relevant) response. Thanks!
|
Clarification of Question by
culturejam-ga
on
21 Sep 2004 13:59 PDT
I have contacted vaious expeditors, and they are only interested in
large production runs ($30,000 min order, etc). So we are seeking the
original short-run CNC shops, preferrably in Shanghai, PRC. Regards,
Doug
|
Request for Question Clarification by
jbf777-ga
on
21 Sep 2004 16:57 PDT
Hello -
Have you heard of this service:
http://www.mfgquote.com
If not, check it out and let me know if it would suffice as an answer.
jbf777
|
Clarification of Question by
culturejam-ga
on
22 Sep 2004 11:58 PDT
Yes, MfgQuote has less than 20 suppliers in China. We are seeking a
direct connection, most likeley in Shanghai. Thanks!
|
Request for Question Clarification by
jbf777-ga
on
28 Sep 2004 14:25 PDT
Hello -
If I understand you, Mfgquote *won't* work for you?
jbf777
|
Request for Question Clarification by
tutuzdad-ga
on
28 Sep 2004 14:39 PDT
This company is in the US, but they supply the software that allows
you to design your own product, then they create the run for you to
your specifications. Does this work as an answer?
EMACHINESHOP
http://www.emachineshop.com/
Regards;
tutuzdad-ga
|
Clarification of Question by
culturejam-ga
on
02 Oct 2004 23:26 PDT
no, MFGQuote will *not* suffice. Nor will the othe clarification.
We are specifically seeking companies in mainland China, if this was
not clear in the original question...
Regards,
CultureJam
|
