With a GE MONOGRAM series "All Refrigerator" or "All Freezer" unit, is
there a common reason doors might be out of alignment, possibly as a
result of the shipping/freight process? Anything that might be common,
or a common solution to door alignment issues with these models.

I've received two GE Monogram models via freight, each shipped
separately from a different vendor.  Both arrived with the doors out
of alignment, in
a nearly similar fashion, despite no commonality between units.

To see a photo of the problem, highlighed in red, see:
http://www.datawide.com/monogram.jpg

I verified the body of the refrigerator/freezer is perfectly square. 
I verified the door is perfectly square.  I verified the top and
bottom are sitting as 0 degrees, perfectly level, using a digital
level.  However, the doors are skewed -- they sag as they are further
from the hinge.

I attempted adjusting the hinges; however, there is no method to
adjust them left-to-right (no play in the screw holes, no alternate mounting
options, etc).  In one GE Monogram manual it claims there is an
adjustment screw that will raise the bottom corner; however, I do not
have this with my models.

Any ideas or suggestions from someone with experience with this unit
would be a *tremendous* help, THANK YOU!!