I need a link to a windows 2000 test tool that with the following
requirements (not Iperf is not acceptable as it sends data as fast as
possible. I want to be able to meter my send rate to by messages and
message sized per second). I want
My generic type requirements are:
--Run on Windows 2000 or greater 
--They can be configured via command line or UI  or via a configuration file.
--The server can have multiple clients connect to it. 
--The server waits for the client connection and then sends the
messages specified in the configuration
--Both Programs should be able to run simultaneously on a platform so
that a sending platform can be a receiving platform at the same time.
--Configuration parameters: 
For Sender 
---Who receiver(s) are up to 4 (Address or DECnet) 
---Message Size (Min=1 byte Max=2000 bytes) 
---Message frequency: Min = 0 (as fast as possible) to 10000 milliseconds. 
---Duration (number of messages or time)
For receiver 
---Who the sender is (IP Address or DECnet Addresses)
Outputs of Program: 
---Start time of messaging 
---End time of messaging 
---Total Messages Sent 
---Total Bytes Sent 
---Rate of send (bits per second): Assume a protocol overhead of 60 bytes.
Other NICE TO HAVES: 
Range of message sizes e.q. Send messages between 10 and 800 bytes
with an average size of 200 bytes.
Ability to specify the message text.

That it

http://www.snapfiles.com/get/speedtest.html

BB

A colleague of mine ran across this too. This is free, but is does not
do the metered download.