Clarification of Answer by
sublime1-ga
on
13 Sep 2005 15:55 PDT
dc...
That's certainly not good news, but I wouldn't be too quick
to give up all hope. Password Crackers is, after all, trying
to sell you a service, and while they're clear that pulling
the batteries and using backdoor passwords won't work, they
don't really address the idea of resetting dipswitches, as
is discussed in this article from LabMice.net with reference
to laptops as well as desktops:
"Using the Motherboard 'Clear CMOS' Jumper or Dipswitch settings"
"Many motherboards feature a set of jumpers or dipswitches
that will clear the CMOS and wipe all of the custom settings
including BIOS passwords. The locations of these jumpers /
dipswitches will vary depending on the motherboard
manufacturer and ideally you should always refer to the
motherboard or computer manufacturers documentation. If
the documentation is unavailable, the jumpers/dipswitches
can sometimes be found along the edge of the motherboard,
next to the CMOS battery, or near the processor. Some
manufacturers may label the jumper / dipswitch CLEAR -
CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD."
"On laptop computers, the dipswitches are usually found
under the keyboard or within a compartment at the bottom
of the laptop."
More on the page:
http://labmice.techtarget.com/articles/BIOS_hack.htm
If that doesn't work out...
The other thing I'd suggest is to open up the laptop and
see if you can identify the precise manufacturer and model
number of the motherboard. Some laptop manufacturers will
use more than one motherboard manufacturer and/or model
in the same model laptop, so the best way to identify the
exact one you have is to eyeball it.
If the manufacturer and model number is not evident, you
might try calling Sony with the serial # for you PC and
see if they can tell you more about the motherboard, and
even how to reset the BIOS password.
Once you have the motherboard manufacturer and model number,
it may be possible to locate documentation for that board, or
boards made by that manufacturer, or to research a method
specific to that board, or contact the manufacturer for input.
Let me know where this takes you...
sublime1-ga