Please find a diagram or some other information that will enable me to
determine the proper location for the hole though the wall in my new
laundry room for a clothes dryer vent.

Next week, a new Kenmore washer and dryer will be delivered and I want
to drill the hole in the wall before they arrive.  I have completely
remodeled the laundry room.  All the plumbing and gas are in place,
but I have no dryer vent yet.

I have ordered a Kenmore 26-44152 washer and a 26-94152 dryer.  They
will be stacked (Dryer on top of washer).

Hello philnj, sorry it took so long to get you an answer. I had
located the info, but it was a .pdf file that was corrupt. I e-mailed
Sears/Kenmore and I just got this reply:

Dear Customer,

Thank you for contacting Sears. 

The following link will take you to a specification sheet for your new 
dryer. The difference in the number does not affect the information we are 
supplying to you.

http://www.commercial.sears.com/comsale/appliance/applcat/spec/26-8405X.pdf

Thank you for choosing Sears to help you create the good life.

Shop sears.com now to pick up great products for the season.
http://www.sears.com

Chuck S.
Sears Customer Care
webcenter@customerservice.sears.com
1-800-349-4358

I looked at the drawing and the location for the vent is 41 inches off
the floor centered in the 27 inch width.

Good luck with your new washer/dryer, Redhoss

---

Request for Answer Clarification by philnj-ga on 13 Nov 2005 18:05 PST

Great! Thanks!  Absolutely the perfect answer!  Can you please tell me
where you went to find this info?  I spent a lot of time on sears.com
but just kept going around in circles.

---

Clarification of Answer by redhoss-ga on 14 Nov 2005 06:43 PST

Glad that I was able to help. I first searched for Kenmore and found this page:

http://www.sears.com/sr/kenmore/homepage/kenmore_homepage.jsp

I entered 26-94152 in the search feature and was sent to this page:

http://www.sears.com/sr/javasr/search.do?bidsite=KENM&BV_SessionID=@@@@0015871188.1131978626@@@@&BV_EngineID=ccfeaddgekjiddfcegecegjdghldgfk.0&targetPage=%2Fmercado%2Fsearchall.jsp&vertical=Sears&keyword=26-94152+&imageField.x=13&imageField.y=8&displayTarget=searchresults

I clicked on the link next to the picture and went here:

http://www.sears.com/sr/javasr/product.do?BV_SessionID=@@@@0015871188.1131978626@@@@&BV_EngineID=ccfeaddgekjiddfcegecegjdghldgfk.0&vertical=APPL&pid=02694152000&bidsite=KENM

I then clicked on "click here for product brochure" and my computer
locked up trying to download a .pdf file. I thought that it might be
because I had never downloaded Adobe 7.0, so I did. I tried again and
got the message "corrupted file". This is when I e-mailed customer
support at Sears and got the e-mail back which I copied and included
in my answer. I don't know where they found the info they provided.
Wow, I'll bet you are sorry now that you asked.

---

Request for Answer Clarification by philnj-ga on 14 Nov 2005 08:15 PST

I followed your procedures, but I didn't get the same results, or the
file to which Sears sent the link.  I suspect that the e-mail request
got the info that I needed.  You must have worded your question to
them very accurately.  Thank you.  I have exactly what I need.  I'll
rate this answer to close it out.

---

Clarification of Answer by redhoss-ga on 14 Nov 2005 16:04 PST

You actually worded the question "very accurately". I copied your
question in my e-mail.