Google Answers Logo
View Question
 
Q: Need a specific screwdriver or bit source ( No Answer,   5 Comments )
Question  
Subject: Need a specific screwdriver or bit source
Category: Miscellaneous
Asked by: evilkeo-ga
List Price: $10.00
Posted: 17 Dec 2005 04:52 PST
Expires: 26 Dec 2005 05:43 PST
Question ID: 606805
I need a place where I can buy a Torx Security T12 screwdriver. It's a
star bit with a small hole in the middle. I would prefer to get a
screwdriver, but a bit would be ok. I would like to be able to buy in
bulk. I've been to Home Depot, Fry's, Radio Shack, and
Sears locally with no luck so far. I've spent a good bit of time
looking for a supplier online, but can't find anything. There WERE,
however, allusions to the fact that they did exist at one time. But
all the links I found led nowhere. Ebay links and other auction type
links will work if no one can find a retailer.
Answer  
There is no answer at this time.

Comments  
Subject: Re: Need a specific screwdriver or bit source
From: drduck4330-ga on 17 Dec 2005 07:03 PST
 
Have you tried a hardware store "Ace" or Westlakes?
Check in the section of the store with the little screws& parts in boxes.
Might have to look around if it is there it can be order thru that supplier.
Hope this helps.
T12 is quite an oddball size i believe.
Subject: Re: Need a specific screwdriver or bit source
From: tsilverman-ga on 17 Dec 2005 08:47 PST
 
I've heard of T10 and T15, but not T12. If you need a T10 or T15 (or
one of many other sizes besides T12), try searching
http://www.mcmaster.com/ for "tamper-resistant torx." Hope this helps.
Subject: Re: Need a specific screwdriver or bit source
From: evilkeo-ga on 17 Dec 2005 09:39 PST
 
i do indeed need a t12 bit. i already have t6, t7, t8, t9, t10, t15,
t20, t25. it's been confirmed by a couple different sources that a t12
is needed for my project. i just checked ace and they don't have it
either. they do have quite a nice selection of other torx bits though.
thanks for your help though.
Subject: Re: Need a specific screwdriver or bit source
From: superp-ga on 18 Dec 2005 11:38 PST
 
I have a contact that will offer all tamper-resistant bits and
screwdrivers to open PS2 (old and new models), XBox, XBox360, PSP and
all other VG Systems
Subject: Re: Need a specific screwdriver or bit source
From: canadianhelper-ga on 18 Dec 2005 15:00 PST
 
Seems you need these in the BMW/VW world...I would check with your local dealer.

Important Disclaimer: Answers and comments provided on Google Answers are general information, and are not intended to substitute for informed professional medical, psychiatric, psychological, tax, legal, investment, accounting, or other professional advice. Google does not endorse, and expressly disclaims liability for any product, manufacturer, distributor, service or service provider mentioned or any opinion expressed in answers or comments. Please read carefully the Google Answers Terms of Service.

If you feel that you have found inappropriate content, please let us know by emailing us at answers-support@google.com with the question ID listed above. Thank you.
Search Google Answers for
Google Answers  


Google Home - Answers FAQ - Terms of Service - Privacy Policy