Not too long ago I bought and recieved a Fuel Injection setup for Gen
1 small-block chevrolet V8s.  The setup included a manifold, computer,
and 8 fuel injectors.  The company that made the setup is Cutler, but
they no longer exist as a company.  They were bought out by Holley in
the mid-late 90's, and the same product is marketed by Holley, but
under their name.  I contacted them and they could not help me as they
use their own line of fuel injectors.

I tested the injectors using a Multimeter, and discovered that they
produced a resistance of 2.3 ohms, meaning that they are Low-Impedance
Injectors.  These injectors are typically used for high-horsepower
applications.  I need to know the flow-rate of the injectors in
pounds, the brand, and any other info that may be available.  I have
included some info to help identify them.

The injectors have 2 codes on them which are 621026 and D1540AA.
There is also a symbol on the injectors.  A picture of the injectors
and the said symbol are included in the following web addresses.

http://www.ukcar.com/features/tech/Engine/injection/Injection/fuel-injector-hand.jpg
http://i10.photobucket.com/albums/a135/Phatfiddler/untitled4.jpg