I am trying to setup a Cisco Pix 501 with it connected to a linksys router.

When I plug in a computer to one of the ports, I get no connectivity
(no IP is received).

Doing a serial connection, I tried doing the following:

ip address outside 192.168.2.1 255.255.255.0
ip address inside 192.168.3.1 255.255.255.0
route outside 0 0 192.168.1.1 1

Still, when I connect my computer to a port on the Pix, I still do not
get an IP address (in windows that would be no connectivity).  I'm
assuming DHCP should be setup as the default on the pix as I didn't
change anything.   But I did try the command:
dhcpd auto_configure

Any ideas?